NIDO INDUSTRIAL
NIDO INDUSTRIAL is a professional fertigation system by Nido S.r.l. (Italy) for large commercial greenhouses with tanks from 1,000 to 100,000 liters. Ultra-compact (60x24x35 cm, 12 kg), it replaces complex multi-panel systems. Industrial pumps: 1,450 ml/min, 50,000L lifespan. Digital pH/EC sensors, app and web monitoring. CE/RoHS, IP44, 2-year warranty.
A compact unit that controls large tanks.
NIDO INDUSTRIAL manages water, pH, EC, and climate across 1,000 to 100,000 liters. It mixes, corrects, stabilizes, and records — a unified control system for complex setups, with real-time monitoring via App and WebApp.
From chaotic systems to unified control.
Traditional fertigation systems often bring unnecessary complexity:
- Multiple control units to install and extensive wiring throughout the system.
- Mechanical devices dependent on water pressure, offering limited control.
- Bulky machines that are hard to ship and always require on-site technician support.
NIDO INDUSTRIAL redefines the standard:
A single, ultra-compact and high-performance unit that installs in minutes and can be easily removed for maintenance.
Inside, it delivers the power and precision of complex professional systems — without the complications.
How NIDO Industrial works.
From your water reservoir to a perfectly balanced nutrient solution. NIDO INDUSTRIAL connects to your system’s tank (closed or open circuit) and turns it into an intelligent mixing tank that prepares irrigation-ready solution.
Operating cycle (every 15 minutes):
- Sample & measure
Analyzes the water using digital sensors to read pH, electrical conductivity (EC), and temperature. - Compare & decide
Checks the values against your setpoints and the active nutrient recipe. - Correct & mix
Precisely doses fertilizers and pH correctors directly into the tank, then mixes and stabilizes the solution to reach the target parameters. - Finally, it delivers the balanced solution to your irrigation lines, ensuring uniformity and consistency throughout your crop.
Consistent efficiency, at every scale.
Whether you’re managing a 1,000-liter tank or a 100,000-liter reservoir, the control logic remains the same, a single system that keeps pH and EC stable with the same level of precision:
- Dosing pumps and fittings are built for high volumes, yet the user experience stays simple and intuitive.
- Management remains predictable and stable, reducing waste and inconsistencies even as your setup expands.
- Scalability is real: no new systems or logic needed, just increase the volume handled.
With NIDO INDUSTRIAL, you get repeatable efficiency regardless of your greenhouse size.
Your greenhouse, wherever you are.
NIDO APP
Control in the palm of your hand.
With NIDO App, you can schedule, monitor, and optimize your greenhouse parameters from anywhere.
- View real-time pH, EC, temperature, humidity, and VPD
- Set recipes and target values in just a few taps
- Get instant alerts and respond immediately
Your greenhouse is never out of sight: every metric and action is right in your pocket.
NIDO Lab
From data to strategy.
With NIDO Lab, the web platform, your data becomes a compass for long-term decision-making.
- Full parameter history with clear charts and comparisons.
- Export reports in Excel or PDF. Open API for integration with external systems.
Analyze trends, evaluate recipe performance, and reduce waste — turning daily tasks into a smart and sustainable strategy.
NIDO App is included. NIDO Lab is available by subscription.
Where NIDO Industrial makes the difference.
Every crop comes with its own challenges.
Whether you manage hydroponic greenhouses, ornamental crops, or irrigated fields, NIDO INDUSTRIAL helps you maintain stability, reduce waste, and ensure production consistency.
High-density hydroponics.
Keeps pH and EC stable even in large volumes, ensuring uniform growth and minimizing the risk of nutrient imbalances.
Irrigated open-field farming.
Centralizes fertigation across large reservoirs, reducing variability between cycles and minimizing water and fertilizer waste.
Professional floriculture.
Automations and repeatable recipes deliver greater consistency in flower color, size, and blooming cycles.
Technical data NIDO Industrial.
Sensors
- pH: 4 – 10 · Resolution 0.01 · Accuracy ±0.05 · 2-point calibration (7.01 and 4.01) with automatic alert
- EC: 0 – 5.0 mS · Resolution 0.01 mS · Accuracy ±0.05 mS · EC/TDS auto-compensation
- Water temperature: 5 – 40 °C · Resolution 0.1 °C · Accuracy ±0.5 °C
- Ambient temperature: 0 – 50 °C · Resolution 0.1 °C · Accuracy ±0.2 °C
- Humidity: 10 – 100% RH · Resolution 1% RH · Accuracy ±3% RH
Dosing pumps
- Flow rate: 1,450 ml/min per pump
- Average lifespan: over 50,000 L pumped (easily serviceable or replaceable)
- Compatibility: all mineral fertilizers · pH+ (Potassium Hydroxide – KOH) · pH– (Phosphoric Acid – H₃PO₄)
Compensation tolerances
- EC: ±0.1 mS
- pH: ±0.2
- Temperature: ±2 °C
- Humidity: ±10%
Product features
- Tank volume: 1,000 – 100,000 L
- Voltage: 100–220 V AC
- Max power consumption: 3 – 30 W
- Protection: IP44
Dimensions and weight
- Dimensions: 600 × 240 × 350 mm
- Weight: 12 kg
Noise levels
- Dosing pump: 70 dB
Water level
- Integrated optical sensor
Certifications and warranty
- Certifications: CE, RoHS
- Warranty: 2 years
Connectivity and data
- Connections: Wi-Fi, Ethernet
- Included app: real-time data, 7-day graphs
- NIDO Lab (optional): unlimited history, reports, API, advanced user management, extended configuration
What’s inside.
FAQ
Automations remain active and data is saved locally. Only remote control is lost until the connection is restored.
- In NIDO App: real-time values of pH, EC, temperature, humidity, VPD, water temperature, with up to 7 days of history.
- In NIDO Lab (subscription): unlimited history, period comparisons, Excel export, advanced user management, extended configurations, read-only API Key.
The mixing-tank allows corrections directly in the tank and ensures parameter stability.
Venturi/inline systems depend more on pressure and flow, which can result in inaccuracy. The choice depends on your goals and installation.
CE, RoHS, and IP44 protection.
For two practical reasons: the hose is bulky but cheap and easy to source locally; the pump size depends on your system and is widely available for €20–40. This way, you get the right parts without extra costs or unnecessary components.
A submersible pump (1,500–3,000 L/h), a working internet connection, a standard ½-inch rubber hose. Installation is quick and doesn’t require special components.
Over 50,000 liters of pumped solution per pump. After that, they can be easily serviced or replaced.
pH sensor calibration: every 30–45 days; pH sensor replacement: every 12–15 months; EC sensor replacement: every 24 months
No. All automations keep running and data is stored locally. Only remote access is lost until the connection is restored.
You can use a SIM-card router (e.g. DWR-932) for easy and fast connectivity.
Yes, a stable connection is required for remote access.
No. The API Keys available in NIDO Lab are read-only and used for data export and analysis only.
With NIDO App: real-time pH, EC, temperature, humidity, VPD, and water temperature, with up to 7 days of history.
With NIDO Lab (subscription): unlimited historical data, period comparisons, Excel export, advanced user management, extended device configuration, and read-only API Key.
You can control: extractors, humidifiers and dehumidifiers, heaters, irrigation systems, grow lights. Each NIDO Plug supports loads up to 2 kW.
Yes. It includes a T/H/VPD sensor (temperature, humidity, and vapor pressure deficit) with a range of up to 2 meters.
To automate temperature and humidity, connect devices via NIDO Plug.
No. NIDO INDUSTRIAL works with a mixing tank, providing higher parameter stability and dosing accuracy than in-line systems.
It works with hydroponic, aeroponic, and drip irrigation setups, in open or closed loops.
It supports reservoirs from 1,000 to 100,000 liters, depending on system configuration.
NIDO INDUSTRIAL is an ultra-compact fertigation system for professional greenhouses. It automatically controls and adjusts water pH and EC, turning your storage tank into a stable, ready-to-use nutrient solution.