WPS button

ASSOCIATION NIDO PLUG
(Left LED yellow, right LED solid blue) Press for 1-3 seconds until the Wi-Fi connection status light turns yellow.

SMARTPHONE PAIRING
(Left LED magenta, right LED solid blue) Press 4-8 seconds until the Wi-Fi connection status light turns magenta.
To pair the smartphone, NIDO Industrial/NIDO ONE V2 must be connected to the internet.

NEW ACCESS POINT PAIRING
(Left LED blue, right LED solid blue)
Press for 9-12 seconds until the Wi-Fi connection status light turns blue.
It is NOT recommended to use this feature to pair NIDO Industrial/NIDO ONE V2 with incompatible access points. Once the pairing is completed, NIDO Industrial/NIDO ONE V2 must be restarted. For a detailed guide, you can watch the following video on YouTube.

Internet connection status

Excellent Wi-Fi signal
(Left LED green, right LED solid blue)

Average Wi-Fi signal
(Left LED yellow, right LED solid blue)

Poor Wi-Fi signal
(Left LED magenta, right LED solid blue)

No Wi-Fi signal
(Left LED red, right LED off)

Connected to Wi-Fi but no internet
(Left LED green, right LED blinking blue)

Internet connection with network cable
(Left LED red, right LED solid blue)