Rules for your safety

Before using NIDO Industrial / NIDO ONE V2, you must carefully read this instruction booklet and take note of all recommendations. It is important to keep it for future reference. The booklet is an integral part of the product and must always be provided when NIDO Industrial / NIDO ONE V2 is used by a new user.

Do not leave NIDO Industrial / NIDO ONE V2 unattended in the presence of children to avoid contact with fertilizers or acids. Unplug the device from the socket if NIDO Industrial / NIDO ONE V2 is not in use. Keep NIDO Industrial / NIDO ONE V2 away from water jets. Clean only with a damp cloth. Damaged components may compromise the accuracy of the system. In case of malfunction, do not use NIDO Industrial / NIDO ONE V2 and contact customer support via WhatsApp (messages only): +39 327 684 4189.

Repairs to NIDO Industrial / NIDO ONE V2 must only be carried out by authorized service centers. Tampering, repairs, or improper maintenance may cause hazards or damage to the user. Children must not play with NIDO Industrial / NIDO ONE V2. The device is not intended for people (including children) with reduced physical, sensory, or mental capabilities or lack of experience, unless supervised or instructed by someone responsible for their safety. Cleaning and maintenance must not be carried out by unsupervised children.

  • NIDO Industrial / NIDO ONE V2 is not suitable for children under the age of fourteen.

RECOMMENDATIONS

  • Keep these instructions.
  • Use plastic gloves and safety goggles when handling phosphoric acid (H₃PO₄), potassium hydroxide (KOH), and fertilizers.
  • Do not scratch, cut, or pull the power and sensor cables of NIDO Industrial / NIDO ONE V2.
  • If you notice an issue (e.g. burning smell), unplug the power and contact customer service at assistenza@nidopro.com or WhatsApp (messages only) +39 327 684 4189.
  • Using NIDO Industrial / NIDO ONE V2 in such conditions can lead to fire or device failure.
  • If the power cable or power supply is damaged, it must be replaced by the manufacturer or qualified technicians.
  • Do not expose NIDO Industrial / NIDO ONE V2 to weather or direct heat sources. The device may freeze or enter protection mode at temperatures above 40°C. Avoid direct sunlight on the unit.
  • Always disconnect NIDO Industrial / NIDO ONE V2 from power before maintenance to avoid electrical shock.
  • Avoid getting components, sensors, or cables wet to prevent short circuits. Do not bend or pull cables to avoid damage.
  • Keep the unit away from heat, humidity, and direct sunlight.
  • Before cleaning, unplug NIDO Industrial / NIDO ONE V2. Use only a damp cloth, avoiding sprays or solvents.