pH Adjusters (H₃PO₄ – KOH)

pH- (PHOSPHORIC ACID H3PO4)

USE ONLY PHOSPHORIC ACID (H3PO4) WITH A CONCENTRATION OF LESS THAN 20%.
USE ONLY PHOSPHORIC ACID (H3PO4) AS A pH REVERSE.
THE USE OF ANY OTHER TYPE OF ACID
WILL IRREPARABLY DAMAGE THE NIDO INDUSTRIAL/NIDO ONE V2 AND VOID THE WARRANTY.

It is possible to introduce phosphoric acid (H3PO4) plus water if high concentrations are available.

Be very careful when using phosphoric acid (H3PO4). Wear safety goggles and gloves. Keep out of the reach of children.

Phosphoric acid (H3PO4) with a concentration of 20-30% can be diluted in the following proportions: 50% tap water 50% phosphoric acid.
Phosphoric acid (H3PO4) with a concentration of 30-55% can be diluted in the following proportions: 80% tap water 20% phosphoric acid.
Do not use phosphoric acid with a concentration greater than 55%.

pH+ (POTASSIUM HYDROXIDE KOH)

USE ONLY POTASSIUM HYDROXIDE (KOH) AT A CONCENTRATION OF LESS THAN 5%.
USE ONLY POTASSIUM HYDROXIDE (KOH) AS A pH+ CORRECTOR. THE USE OF ANY OTHER ALKALINE SUBSTANCE WILL IRREPARABLY DAMAGE THE NIDO INDUSTRIAL/NIDO ONE V2 AND VOID THE WARRANTY.

It is possible to introduce potassium hydroxide (KOH) plus water if high concentrations are available.

Be very careful when using potassium hydroxide (KOH). Wear safety goggles and gloves. Keep out of the reach of children.

For potassium hydroxide (KOH) with a concentration of 6-20%, potassium hydroxide can be diluted in the following proportions 70% tap water 30% potassium hydroxide.
For potassium hydroxide (KOH) with a concentration of 20-30%, potassium hydroxide can be diluted in the following proportions 80% tap water 20% potassium hydroxide. Do not use potassium hydroxide with a concentration greater than 30%.