NIDO plug

NIDO plugs are Wi-Fi sockets designed to control greenhouse equipment (air extractors, humidifiers, dehumidifiers, air heaters, irrigation and lights) with a maximum power rating of up to 2 kilowatts. NIDO plugs work ONLY in combination with NIDO Industrial/NIDO ONE V2, they cannot work independently and are controlled via the NidoPro app, updated to the latest version available. All hardware connections must be carried out by qualified personnel who are aware of the risks of the installation, taking into account the minimum safety standards and in a de-energised state.

The user assumes all responsibility and risk associated with the installation, configuration and use of the products to achieve the intended results. DO NOT connect the NIDO plug to loads that may be damaged by frequent switching on/off. Place the NIDO plug at a maximum distance of 5 meters in a straight line. If the NIDO plug frequently disconnects and reconnects, reduce the distance between NIDO Industrial/NIDO ONE V2 and the NIDO plug to 1-2 meters. Configure the NIDO plug so that the connected device is not switched on and off more often than the manufacturer of the device recommends.

  • Avoid walls or partitions between the NIDO Industrial/NIDO ONE V2 and the NIDO plug.
  • DO NOT get the NIDO plug wet.
  • DO NOT clean the NIDO plug with liquids or solvents.
  • DO NOT disassemble, open or attempt to repair the NIDO plug. Opening a sealed component will void the warranty.
  • Place all sockets at least 1 metre above the ground to avoid contact with water.
  • The provided NIDO plug is preconfigured as a “light,” but its type can be changed.

Pairing NIDO plug

  • 1
    Connect the NIDO plug to the mains socket.
  • 2
    Press the button on the NIDO plug for 5 seconds, wait until the light on the NIDO plug starts blinking.
  • 3
    Press the WPS button on the NIDO Industrial/NIDO ONE V2 for 1-3 seconds until the Wi-Fi connection status light turns yellow.
  • 4
    Open the NidoPro app and configure the type of device connected to the NIDO plug (air extractors, humidifiers, dehumidifiers, air heaters, irrigation and lights).