Introduction and warnings

Thank you for purchasing the NIDO Industrial/NIDO ONE V2. We recommend that you read this manual carefully.

PRESENTATION
NIDO Industrial/NIDO ONE V2 constantly measures the main parameters of your hydroponic cultivation (pH, EC, temperature, humidity, VPD, water temperature, water level) and manages the greenhouse equipment (lights, exhaust, sprinklers, humidifiers, dehumidifiers, heaters, flow pump) via Wi-Fi controlled NIDO plugs. Values are communicated via the NidoPro app (available for IOS and Android devices). The NidoPro app allows you to configure your own growing formula to automate all fertiliser, pH and climate management processes. If you want to use automatic growing, NIDO Industrial/NIDO ONE V2 comes with pre-configured recipes to make it easy to start growing.

NIDO INDUSTRIAL/NIDO ONE V2 MEASURE

  • The pH of the water: this value indicates the degree of acidity or alkalinity of the water; an optimal pH allows the plant to absorb the full range of necessary minerals.
  • EC (mS/TDS): measurement of the concentration of inorganic salts in the water for fertiliser management.
  • Temperature (°C/°F) and humidity: ambient temperature and humidity.
  • Water temperature: the temperature of the water in the nutrient solution is crucial for a healthy root system.

NIDO INDUSTRIAL/NIDO ONE V2 CONTROL

  • Precision acid dosing unit (pH/pH+) to counteract the rise in pH in the nutrient solution.
  • Precision fertiliser dosing unit to correctly balance the supply of nutrients to the plant.
  • Tank water level.
  • Greenhouse equipment control (lights, extractors, etc.) to manage greenhouse equipment.
  • Modifications made by the user without the express written consent of NIDO S.r.l. will void the warranty and release NIDO S.r.l. from any liability for damage caused by a defective product. The same applies to the use of non-original spare parts and the use of inappropriate fertilisers, pH- and pH+.
  • Do not pour water, fertilisers, pH- (phosphoric acid H3PO4), pH+ (potassium hydroxide KOH) on NIDO Industrial/NIDO ONE V2.
  • Use only phosphoric acid (H3PO4) with a concentration of less than 20%. Use only phosphoric acid (H3PO4) as a pH- corrector, the use of any other acid or substance will cause irreparable damage to the unit and void the warranty.
  • Use only potassium hydroxide (KOH) with a concentration of less than 5%. Use only potassium hydroxide (KOH) as a pH+ corrector. The use of any other alkaline substance will cause irreparable damage to the unit and will void the warranty.
  • Periodic maintenance of the pH probe and replacement every 18 months is essential.