Important
These key points are not intended to replace the reading of the manual, but to highlight certain aspects that are essential for the correct operation of the NIDO Industrial/NIDO ONE V2 in order to avoid voiding the warranty.
1. Place NIDO Industrial/NIDO ONE V2 away from splashing water, do not get it wet, do not pour fertilisers, acids and alkalis directly on the unit.
2. Never leave the pH probe dry, when you are not using NIDO Industrial/NIDO ONE V2, place the pH probe in the storage cap and carry out regular maintenance and cleaning.
3. USE ONLY PHOSPHORIC ACID (H3PO4) WITH A CONCENTRATION OF LESS THAN 20%.
USE ONLY PHOSPHORIC ACID (H3PO4) AS pH RESTORER, THE USE OF ANY OTHER TYPE OF ACID WILL DAMAGE THE NIDO INDUSTRIAL/NIDO ONE V2 AND VOID THE WARRANTY.
4. DO NOT USE ORGANIC FERTILISERS, ONLY use liquid mineral fertilisers, DO NOT use fertilisers that are too dense.
5. Periodic (once a month) maintenance of the pH probe is recommended. Remove the pH probe and check the cleanliness of the glass bulb, use pH probe cleaning fluid and a toothbrush to keep the glass bulb of the probe clean, it is recommended to rehydrate the probe for at least 24/48 hours every 2 months and at the end of each cycle by soaking it in KCI storage fluid.
6. Regularly (at least once at the end of each growing cycle) clean the NIDO Industrial/NIDO ONE V2 with a damp cloth to avoid dirt and fertiliser residues and run the device cleaning cycle via the NidoPro app.
7. The maximum distance between the Wi-Fi devices (Access Point and NIDO Connector) should not exceed 5 metres in an open environment, avoid walls or partitions between NIDO Industrial/NIDO ONE V2 and the Wi-Fi devices (Access Point and NIDO Connector). If the connection is lost, move the Wi-Fi devices closer to the NIDO Industrial/NIDO ONE V2.
8. USE ONLY POTASSIUM HYDROXIDE (KOH) WITH A CONCENTRATION OF LESS THAN 5%.
USE ONLY POTASSIUM HYDROXIDE (KOH) AS A pH+ CORRECTOR. THE USE OF ANY OTHER ALKALINE SUBSTANCE WILL IRREPARABLY DAMAGE THE NIDO INDUSTRIAL/NIDO ONE V2 AND VOID THE WARRANTY.
WE RECOMMEND THAT YOU READ THE ENTIRE MANUAL CAREFULLY.