End-cycle tasks

1. Disconnect NIDO Industrial and remove the 4 tubes from the fertilizer/pH adjuster tanks. Turn off and remove the submersible pump from the tank.

2. Fill a container halfway with clean water. Insert the 4 intake tubes and the submersible pump into the container. Reconnect NIDO Industrial and turn on the submersible pump.

3. Open the NidoPro app: Settings > Device Cleaning. Wait until the cleaning process is complete.

cleaning cycle

4. Disconnect NIDO Industrial and the submersible pump. Remove the water IN/OUT tubes. Remove the pH probe and place it in the cap filled with KCl storage solution.